{"title":"Fits S100X8","description":"\u003cp\u003eConnect your \u003cstrong\u003eS100X8 IBC outlet—commonly described as 3″ buttress or DN80—to hoses, pipework and dispensing equipment\u003c\/strong\u003e with CPP® adaptors.\u003c\/p\u003e\n\u003cp\u003eChoose from male Camlock connections, BSPP and NPS threaded fittings, hose tails, S60X6 converters, garden hose connections and dust caps. \u003cstrong\u003eSwivel adaptors\u003c\/strong\u003e feature an independently turning female nut, helping you install the fitting without rotating the attached hose or pipework. An extended-length Camlock adaptor is also available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIBC compatibility:\u003c\/strong\u003e suitable for SCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz tanks when fitted with a matching \u003cstrong\u003eS100X8 male outlet and compatible sealing face\u003c\/strong\u003e. Check the actual connection, particularly on reconditioned tanks where the valve may have been replaced.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIdentifying S100X8:\u003c\/strong\u003e the male outlet thread has a nominal \u003cstrong\u003e100 mm outside diameter and 8 mm pitch\u003c\/strong\u003e. The 3″\/DN80 designation refers to the nominal valve size; the manufacturer’s name or DN80 marking alone does not confirm the thread.\u003c\/p\u003e\n\u003cp\u003eAdaptor bodies are \u003cstrong\u003eglass-filled polypropylene\u003c\/strong\u003e, with \u003cstrong\u003ePP Olefin Elastomer IBC seals\u003c\/strong\u003e. The dust cap is polypropylene. Individual product pages provide the connection and material details.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdaptor working pressure: 1 bar (approximately 15 psi) at 20°C. Pressure tested to 60 psi (approximately 4.1 bar).\u003c\/strong\u003e These ratings apply to the adaptors, including swivel versions. Follow the limits of your IBC tank, valve and connected equipment.\u003c\/p\u003e\n\u003cp\u003eRefer to our \u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCamlock size chart\u003c\/a\u003e, \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003echemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e when selecting your fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with measurements, will help us identify what you need.\u003c\/p\u003e","products":[{"product_id":"s100x8-female-buttress-dust-p-p-black-c-w-seal","title":"S100X8 Female Dust Cap with Seal - Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eS100X8 female dust cap\u003c\/strong\u003e screws onto a matching \u003cstrong\u003eS100X8 male IBC valve outlet (3″ buttress, DN80)\u003c\/strong\u003e to cover the outlet and help protect it from dirt when it is not in use.\u003c\/p\u003e\u003ch3\u003eConnection and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e S100X8 female buttress thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e black polypropylene (PP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e 3BC1008U024.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the cap carefully to avoid cross-threading. Use with the IBC valve closed and release pressure before removing the cap.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493481652572,"sku":"3BC1008U024","price":8.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/3bc1008u024.png?v=1728230419"},{"product_id":"1-part-a-1-camlock-adaptor-x-s100x8-female-g-p-p","title":"S100X8 Female × 1″ Male Camlock Type A - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eType A (Part A) IBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e1″ Male Camlock Type A\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 1″ Male Camlock Type A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e CMA1030U027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1″ male Camlock, \u003cstrong\u003eType A (Part A)\u003c\/strong\u003e. Fits matching 1″ female Camlock couplings manufactured to EN 14420-7 or US specification A-A-59326. Check the mating dimensions using the \u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCPP® Camlock size chart\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493637202268,"sku":"CMA1030U027","price":33.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cma1030u027_ce7e0139-5310-4595-92a5-7bc097ab6f7d.png?v=1735573990"},{"product_id":"2-part-a-2-camlock-adaptor-x-s100x8-female-g-p-p","title":"S100X8 Female × 2″ Male Camlock Type A - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eType A (Part A) IBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e into a \u003cstrong\u003e2″ male Camlock connection\u003c\/strong\u003e, allowing a matching female Camlock coupling to connect your hose or pipework to the IBC.\u003c\/p\u003e\n\u003ch3\u003eConnections and materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female thread (3″ buttress, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 2″ male Camlock, Type A (Part A).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e CMA2030U027.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\n\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e fits matching 2″ female Camlock couplings manufactured to EN 14420-7 or US specification A-A-59326. Check the mating dimensions using the \u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCPP® Camlock size chart\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\n\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\n\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493653061980,"sku":"CMA2030U027","price":33.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CMA2030U027-2.png?v=1735578365"},{"product_id":"3-part-a-3-camlock-adaptor-x-s100x8-female-buttress","title":"S100X8 Female × 3″ Male Camlock Type A - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eType A (Part A) IBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e3″ Male Camlock Type A\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 3″ Male Camlock Type A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e CMA30U027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 3″ male Camlock, \u003cstrong\u003eType A (Part A)\u003c\/strong\u003e. Fits matching 3″ female Camlock couplings manufactured to EN 14420-7 or US specification A-A-59326. Check the mating dimensions using the \u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCPP® Camlock size chart\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493667447132,"sku":"CMA30U027","price":25.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cma30u027-3.png?v=1728231319"},{"product_id":"3-part-a-ext-light-3-ext-cam-adaptor-x-s100x8-female-g-p-p","title":"S100X8 Female × 3″ Male Camlock Type A — Extended Length - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eType A (Part A) IBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e3″ Male Camlock Type A\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 3″ Male Camlock Type A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e CMAX30U027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 3″ male Camlock, \u003cstrong\u003eType A (Part A)\u003c\/strong\u003e. Fits matching 3″ female Camlock couplings manufactured to EN 14420-7 or US specification A-A-59326. Check the mating dimensions using the \u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCPP® Camlock size chart\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtended Length:\u003c\/strong\u003e this is the extended-length version of the S100X8 female × 3″ male Camlock adaptor.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493693956444,"sku":"CMAX30U027","price":33.43,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cmax30u027.png?v=1728231470"},{"product_id":"2-bsp-female-x-s100x8-buttress-female-g-p-p-c-w-seals","title":"S100X8 Female × 2″ BSPP Female - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e2″ BSPP Female\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 2″ BSPP Female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HFFB32U027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOutlet thread:\u003c\/strong\u003e 2″ BSPP female, a parallel G thread specified by ISO 228-1. Use a matching fitting and suitable sealing arrangement; the parallel thread itself does not provide the pressure seal.\u003c\/p\u003e\u003cp\u003eA seal is also supplied for the 2″ BSPP female connection.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493756051804,"sku":"HFFB32U027","price":33.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/HFFB32U027.png?v=1735569494"},{"product_id":"2-nps-female-x-s100x8-buttress-female-g-p-p-c-w-seals","title":"S100X8 Female × 2″ NPS Female Easy-Seal - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e2″ NPS Female Easy-Seal\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 2″ NPS Female Easy-Seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HFFM32U027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNPS Female Easy-Seal:\u003c\/strong\u003e the 2″ straight female thread seals against a matching outlet face using the supplied gasket. The NPS connection is parallel, unlike tapered NPT. Check the thread and sealing face; these connections should not be selected by size alone.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNPS female connection:\u003c\/strong\u003e hand-tighten until gasket contact, then tighten a further 80° minimum to 160° maximum, using a suitable strap wrench where necessary. This guidance applies to the NPS connection.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493757493596,"sku":"HFFM32U027","price":33.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/HFFB32U027_7a352d4b-7b42-4141-88e2-12ce523b069f.png?v=1735569549"},{"product_id":"s100x8-female-buttress-c-w-seal-x-3-4-bsp-female-g-p-p","title":"S100X8 Female Swivel × ¾″ BSPP Female - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e¾″ BSPP Female\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSwivelling IBC connection:\u003c\/strong\u003e the S100X8 female nut turns independently during installation, helping you connect the adaptor without rotating the attached hose or pipework.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female swivel buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e ¾″ BSPP Female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HFFSB100U075B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOutlet thread:\u003c\/strong\u003e ¾″ BSPP female, a parallel G thread specified by ISO 228-1. Use a matching fitting and suitable sealing arrangement; the parallel thread itself does not provide the pressure seal.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493758050652,"sku":"HFFSB100U075B027","price":33.44,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/hffsb100u075b027.jpg?v=1728232223"},{"product_id":"s100x8-female-buttress-c-w-seal-x-1-bsp-female-g-p-p","title":"S100X8 Female Swivel × 1″ BSPP Female - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e1″ BSPP Female\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSwivelling IBC connection:\u003c\/strong\u003e the S100X8 female nut turns independently during installation, helping you connect the adaptor without rotating the attached hose or pipework.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female swivel buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 1″ BSPP Female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HFFSB100U10B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOutlet thread:\u003c\/strong\u003e 1″ BSPP female, a parallel G thread specified by ISO 228-1. Use a matching fitting and suitable sealing arrangement; the parallel thread itself does not provide the pressure seal.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493758443868,"sku":"HFFSB100U10B027","price":33.44,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/hffsb100u10b027.jpg?v=1728232229"},{"product_id":"s100x8-female-buttress-c-w-seal-x-2-bsp-female-c-w-seal-g-p-p","title":"S100X8 Female Swivel × 2″ BSPP Female - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e2″ BSPP Female\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSwivelling IBC connection:\u003c\/strong\u003e the S100X8 female nut turns independently during installation, helping you connect the adaptor without rotating the attached hose or pipework.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female swivel buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 2″ BSPP Female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HFFSB100U20BG027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOutlet thread:\u003c\/strong\u003e 2″ BSPP female, a parallel G thread specified by ISO 228-1. Use a matching fitting and suitable sealing arrangement; the parallel thread itself does not provide the pressure seal.\u003c\/p\u003e\u003cp\u003eA seal is also supplied for the 2″ BSPP female connection.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493760672092,"sku":"HFFSB100U20BG027","price":33.44,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/hffsb100u20bg027.png?v=1728232235"},{"product_id":"s100x8-female-buttress-c-w-seal-x-2-nps-female-c-w-seal-g-p-p","title":"S100X8 Female Swivel × 2″ NPS Female Easy-Seal - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC swivel adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e2″ NPS Female Easy-Seal\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSwivelling IBC connection:\u003c\/strong\u003e the S100X8 female nut turns independently during installation, helping you connect the adaptor without rotating the attached hose or pipework.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female swivel buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 2″ NPS Female Easy-Seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HFFSM100U20M027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNPS Female Easy-Seal:\u003c\/strong\u003e the 2″ straight female thread seals against a matching outlet face using the supplied gasket. The NPS connection is parallel, unlike tapered NPT. Check the thread and sealing face; these connections should not be selected by size alone.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNPS female connection:\u003c\/strong\u003e hand-tighten until gasket contact, then tighten a further 80° minimum to 160° maximum, using a suitable strap wrench where necessary. This guidance applies to the NPS connection.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493764833628,"sku":"HFFSM100U20M027","price":33.44,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/hffsm100u20m027.jpg?v=1728232293"},{"product_id":"s100x8-female-buttress-c-w-seal-x-19mm-hose-tail-g-p-p","title":"S100X8 Female Swivel × ¾″ (19 mm) Hose Tail - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e¾″ (19 mm) Hose Tail\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSwivelling IBC connection:\u003c\/strong\u003e the S100X8 female nut turns independently during installation, helping you connect the adaptor without rotating the attached hose or pipework.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female swivel buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e ¾″ (19 mm) Hose Tail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HFU100U075T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHose connection:\u003c\/strong\u003e ¾″ (19 mm) hose tail. Select a compatible hose of the stated nominal size and secure it using a suitable hose clamp or fastening system for the application.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493774664028,"sku":"HFU100U075T027","price":33.44,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/hfu100u075t027.png?v=1728232426"},{"product_id":"s100x8-female-buttress-c-w-seal-x-1-25mm-hose-tail-g-p-p","title":"S100X8 Female Swivel × 1″ (25 mm) Hose Tail - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e1″ (25 mm) Hose Tail\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSwivelling IBC connection:\u003c\/strong\u003e the S100X8 female nut turns independently during installation, helping you connect the adaptor without rotating the attached hose or pipework.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female swivel buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 1″ (25 mm) Hose Tail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HFU100U10T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHose connection:\u003c\/strong\u003e 1″ (25 mm) hose tail. Select a compatible hose of the stated nominal size and secure it using a suitable hose clamp or fastening system for the application.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493775319388,"sku":"HFU100U10T027","price":33.44,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/hfu100u10t027.png?v=1728232431"},{"product_id":"s100x8-female-buttress-c-w-seal-x-1-32mm-hose-tail-g-p-p","title":"S100X8 Female Swivel × 1¼″ (32 mm) Hose Tail - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e1¼″ (32 mm) Hose Tail\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSwivelling IBC connection:\u003c\/strong\u003e the S100X8 female nut turns independently during installation, helping you connect the adaptor without rotating the attached hose or pipework.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female swivel buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 1¼″ (32 mm) Hose Tail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HFU100U12T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHose connection:\u003c\/strong\u003e 1¼″ (32 mm) hose tail. Select a compatible hose of the stated nominal size and secure it using a suitable hose clamp or fastening system for the application.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493776662876,"sku":"HFU100U12T027","price":33.44,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/hfu100u12t027.png?v=1728232440"},{"product_id":"s100x8-female-buttress-c-w-seal-x-1-38mm-hose-tail-g-p-p","title":"S100X8 Female Swivel × 1½″ (38 mm) Hose Tail - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e1½″ (38 mm) Hose Tail\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSwivelling IBC connection:\u003c\/strong\u003e the S100X8 female nut turns independently during installation, helping you connect the adaptor without rotating the attached hose or pipework.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female swivel buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 1½″ (38 mm) Hose Tail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HFU100U15T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHose connection:\u003c\/strong\u003e 1½″ (38 mm) hose tail. Select a compatible hose of the stated nominal size and secure it using a suitable hose clamp or fastening system for the application.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493777318236,"sku":"HFU100U15T027","price":33.44,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/hfu100u15t027.png?v=1728232448"},{"product_id":"s100x8-female-buttress-c-w-seal-x-2-50mm-hose-tail-g-p-p","title":"S100X8 Female Swivel × 2″ (50 mm) Hose Tail - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e2″ (50 mm) Hose Tail\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSwivelling IBC connection:\u003c\/strong\u003e the S100X8 female nut turns independently during installation, helping you connect the adaptor without rotating the attached hose or pipework.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female swivel buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 2″ (50 mm) Hose Tail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HFU100U20T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHose connection:\u003c\/strong\u003e 2″ (50 mm) hose tail. Select a compatible hose of the stated nominal size and secure it using a suitable hose clamp or fastening system for the application.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493778727260,"sku":"HFU100U20T027","price":33.44,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/hfu100u20t027.png?v=1728232455"},{"product_id":"3-bsp-hex-male-x-s100x8-female-buttress","title":"S100X8 Female × 3″ BSPP Hex Male - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e3″ BSPP Hex Male\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 3″ BSPP Hex Male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HMFB30U027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOutlet thread:\u003c\/strong\u003e 3″ BSPP male, a parallel G thread specified by ISO 228-1. Use a matching fitting and suitable sealing arrangement; the parallel thread itself does not provide the pressure seal.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493797929308,"sku":"HMFB30U027","price":25.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/HMFB30U027-2.png?v=1735566826"},{"product_id":"2-bsp-male-x-s100x8-female-buttress-c-w-seal-g-p-p","title":"S100X8 Female × 2″ BSPP Male - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e2″ BSPP Male\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 2″ BSPP Male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HMFB32U027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOutlet thread:\u003c\/strong\u003e 2″ BSPP male, a parallel G thread specified by ISO 228-1. Use a matching fitting and suitable sealing arrangement; the parallel thread itself does not provide the pressure seal.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493798060380,"sku":"HMFB32U027","price":25.12,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/HMFM32U027-2_f6b4faee-ff4f-4d90-8f55-1b606f50b989.png?v=1735571275"},{"product_id":"2-nps-male-x-s100x8-female-buttress-c-w-seal-g-p-p","title":"S100X8 Female × 2″ NPSM Male - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e2″ NPSM Male\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 2″ NPSM Male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HMFM32U027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOutlet thread:\u003c\/strong\u003e 2″ NPSM male, an American straight (parallel) pipe thread. Connect to a matching female fitting with a suitable sealing arrangement. NPSM is parallel, unlike tapered NPT.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493801992540,"sku":"HMFM32U027","price":25.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/HMFM32U027.png?v=1735571188"},{"product_id":"rd78-din-11851-male-x-s100-x-8-female-buttress-g-p-p-nat","title":"S100X8 Female × RD78 Male (DIN 11851) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003eRD78 Male (DIN 11851)\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e RD78 Male (DIN 11851).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP), natural colour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HMFR3078U028.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e RD78 male round thread, DIN 11851 connection type. Check the mating union dimensions and seal arrangement before ordering.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493804679516,"sku":"HMFR3078U028","price":33.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/a6d6d57b-5b91-48e8-9e28-fcd3152f0602.png?v=1747327824"},{"product_id":"s100x8-female-buttress-c-w-seal-swivel-x-2-npsm-male-thread-g-p-p","title":"S100X8 Female Swivel × 2″ NPSM Male - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e2″ NPSM Male\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSwivelling IBC connection:\u003c\/strong\u003e the S100X8 female nut turns independently during installation, helping you connect the adaptor without rotating the attached hose or pipework.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female swivel buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 2″ NPSM Male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HMFSM100U20M027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOutlet thread:\u003c\/strong\u003e 2″ NPSM male, an American straight (parallel) pipe thread. Connect to a matching female fitting with a suitable sealing arrangement. NPSM is parallel, unlike tapered NPT.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493809856860,"sku":"HMFSM100U20M027","price":33.44,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/hmfsm100u20m027.jpg?v=1728232867"},{"product_id":"s100x8-female-buttress-c-w-seal-x-11-5nhr-male-usa-garden-hose-thread-g-p-p","title":"S100X8 Female × ¾″–11.5 NHR Male US Garden Hose Thread - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e¾″–11.5 NHR Male US Garden Hose Thread\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e ¾″–11.5 NHR Male US Garden Hose Thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HMFSNHR75100U027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOutlet thread:\u003c\/strong\u003e ¾″–11.5 NHR male US garden hose thread. Use a matching female US garden hose connection with a suitable seal.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493810020700,"sku":"HMFSNHR75100U027","price":33.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/hmfsnhr75100u027-2.png?v=1728232873"},{"product_id":"s100x8-female-buttress-c-w-seal-swivel-x-s60x6-male-thread-g-p-p","title":"S100X8 Female Swivel × S60X6 Male Buttress - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003eS60X6 Male Buttress\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSwivelling IBC connection:\u003c\/strong\u003e the S100X8 female nut turns independently during installation, helping you connect the adaptor without rotating the attached hose or pipework.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female swivel buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e S60X6 Male Buttress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HMFSUD100U60UD027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOutlet thread:\u003c\/strong\u003e S60X6 male buttress, nominal 60 mm male outside diameter with 6 mm pitch. Use a matching S60X6 female fitting with a suitable seal.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493810282844,"sku":"HMFSUD100U60UD027","price":33.44,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/hmfsud100u60ud027.jpg?v=1728232880"},{"product_id":"s60x6-male-buttress-x-s100x8-female-buttress-c-w-seal","title":"S100X8 Female × S60X6 Male Buttress - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003eS60X6 Male Buttress\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e S60X6 Male Buttress.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HMFU32U027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOutlet thread:\u003c\/strong\u003e S60X6 male buttress, nominal 60 mm male outside diameter with 6 mm pitch. Use a matching S60X6 female fitting with a suitable seal.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493811986780,"sku":"HMFU32U027","price":25.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/hmfu32u027-2.png?v=1744019928"},{"product_id":"s100x8-female-buttress-x-12-5mm-0-5-hozelock-gardena-type-adapter","title":"S100X8 Female × ½″ (12.5 mm) Hozelock \/ Gardena Type Connector - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e½″ (12.5 mm) Hozelock \/ Gardena Type Connector\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e ½″ (12.5 mm) Hozelock \/ Gardena Type Connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HMFSHL05HL100U027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e ½″ (12.5 mm) Hozelock \/ Gardena type connector, for a matching quick-connect hose coupling. Check the mating connector profile before ordering.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49506030682460,"sku":"HMFSHL05HL100U027","price":33.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/hmfshl05hl100u027-2.png?v=1728402077"},{"product_id":"s100x8-female-buttress-c-w-seal-x-3-75mm-hose-tail-g-p-p","title":"S100X8 Female Swivel × 3″ (75 mm) Hose Tail - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eIBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e3″ (75 mm) Hose Tail\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSwivelling IBC connection:\u003c\/strong\u003e the S100X8 female nut turns independently during installation, helping you connect the adaptor without rotating the attached hose or pipework.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female swivel buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 3″ (75 mm) Hose Tail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e HFU100U30T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHose connection:\u003c\/strong\u003e 3″ (75 mm) hose tail. Select a compatible hose of the stated nominal size and secure it using a suitable hose clamp or fastening system for the application.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":54204279914844,"sku":"HFU100U30T027","price":33.44,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/8c2fc2ff-e7ec-4846-ad95-ef9de3c8ff84.png?v=1742829374"},{"product_id":"2-camlock-male-with-21b-x-s100x8-female-gasket","title":"S100X8 Female × 2″ Male Camlock Type A with 2⅛″ Cap Thread - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® \u003cstrong\u003eType A (Part A) IBC adaptor\u003c\/strong\u003e converts an \u003cstrong\u003eS100X8 male outlet (3″ buttress, DN80)\u003c\/strong\u003e to a \u003cstrong\u003e2″ Male Camlock Type A with 2⅛″ Cap Thread\u003c\/strong\u003e connection for compatible dispensing equipment.\u003c\/p\u003e\u003ch3\u003eConnections and materials\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIBC connection:\u003c\/strong\u003e S100X8 female buttress thread (3″, DN80) with supplied gasket seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet connection:\u003c\/strong\u003e 2″ Male Camlock Type A with 2⅛″ Cap Thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e glass-filled polypropylene (GFPP).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied IBC seal:\u003c\/strong\u003e PP Olefin Elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct code:\u003c\/strong\u003e CMA20OB30U027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eThread identification and compatibility\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eS100X8\u003c\/strong\u003e identifies a buttress thread with a nominal 100 mm male thread diameter and an 8 mm pitch. Check the thread on your IBC valve before ordering; this connection is different from S60X6, BSP and NPS threads.\u003c\/p\u003e\u003cp\u003eThe supplied gasket seals against the mating face of the IBC outlet. Correct fit depends on both the thread and the sealing face.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ male Camlock, \u003cstrong\u003eType A (Part A)\u003c\/strong\u003e. Fits matching 2″ female Camlock couplings manufactured to EN 14420-7 or US specification A-A-59326. Check the mating dimensions using the \u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCPP® Camlock size chart\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdditional dust-cap thread:\u003c\/strong\u003e external 2⅛″ (63 mm) BSPP short male thread for attaching a matching low-profile female dust cap.\u003c\/p\u003e\u003ch3\u003eIBC manufacturer compatibility\u003c\/h3\u003e\n\u003cp\u003eSuitable for \u003cstrong\u003eSCHÜTZ, WERIT, Greif, MAUSER (Mamor), Fustiplast and Sotralentz IBCs\u003c\/strong\u003e when fitted with a \u003cstrong\u003ematching S100X8 male buttress outlet on a 3″ (DN80) valve\u003c\/strong\u003e and a compatible sealing face.\u003c\/p\u003e\n\u003cp\u003eThese manufacturers use different valve and outlet options. Confirm the actual S100X8 thread and sealing face before ordering; the tank brand or DN80 marking alone does not confirm fit. On reconditioned IBCs, check the valve currently installed.\u003c\/p\u003e\n\u003ch3\u003eWorking pressure and testing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking pressure:\u003c\/strong\u003e 1 bar (approximately 15 psi) at 20°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure tested to:\u003c\/strong\u003e 60 psi (approximately 4.1 bar).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe working pressure applies to the adaptor. Follow the limits of the IBC tank, valve and connected equipment; this rating does not authorise pressurising an IBC tank.\u003c\/p\u003e\n\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck that the outlet thread and sealing face are clean and undamaged, and that the gasket is correctly seated. Align the adaptor carefully to avoid cross-threading. Support attached hoses and pipework to reduce strain on the IBC valve, and release pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eMaterial and chemical suitability\u003c\/h3\u003e\n\u003cp\u003eCheck the suitability of the fitting and seal for your liquid and operating conditions. Refer to the \u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e and \u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eMaterial Application Statement\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsure about your thread or connection?\u003c\/strong\u003e Please contact us and we’ll help you select the correct adaptor. A clear photograph of the outlet, together with any measurements, will help us identify what you need.\u003c\/p\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":54264635752796,"sku":"CMA20OB30U027","price":33.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/9f3fa6e7-196a-4f87-93c3-fc2c5737c4bd.png?v=1743764230"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/collections\/valve_s100-adaptor.png?v=1789562332","url":"https:\/\/us.cpp.parts\/collections\/fits-s100x8.oembed?page=2","provider":"CPP.PARTS","version":"1.0","type":"link"}